Connect-Tek USB-2 Spécifications télécharger pdf (Page 29)

Command Groups

Bus Command Gr

oup

Use the Bus commands when working with serial bus measurements.

Install the DPO2EMBD application module when working with I

CorSPI

bus signals.

Install the DPO2AUTO module when working with CAN or LIN bus signals.

Install the DPO2COMP module when working with RS232 bus signals.

Table2-15: BusCommands

Commands Description

BUS Returns the parameters for each bus

BUS:B<x>:CAN:BITRate Sets or returns the bit rate for the CAN bus

BUS:B<x>:CAN:PRObe Sets or returns the probing method used to

probe the CA N bus

BUS:B<x>:CAN:SAMPLEpoint Sets or r eturns the sample point (in %) to

sample during each bit period

BUS:B<x>:CAN:SOUrce Sets or returns the C AN data source

BUS:B<x>:DISplay:FORMAt Sets the display format for the numerical

information in the speciﬁed bus waveform

BUS:B<x>:I2C:ADDRess:RWINClude Sets and returns whether the read/write bit is

included in the address

BUS:B<x>:I2C{:CLOCK|:SCLK}:SOUrce Sets or returns the I2C SCLK source

BUS:B<x>:I2C{:DATA|:SDATA}:SOUrce Sets or returns the I2C SDATA source

BUS:B<x>:LABel Sets or returns the waveform label for the

speciﬁed bus

BUS:B<x>:LIN:BITRate Sets or returns the bit rate for LIN

BUS:B<x>:LIN:IDFORmat Sets or returns the L IN ID format

BUS:B<x>:LIN:POLARity Sets or returns the LIN polarity

BUS:B<x>:LIN:SAMPLEpoint Sets or r eturns the sample point (in %) at

which to sample during each bit period

BUS:B<x>:LIN:SOUrce Sets or r eturns the LIN data s ource

BUS:B<x>:LIN:STANDard Sets or returns the LIN standard

BUS:B<x>:PARallel:BIT<x>:SOUrce Sets or returns the parallel bit <x> s ource

BUS:B<x>:PARallel:CLOCK:EDG E Sets or returns the parallel clock edge for

bus <x>

BUS:B<x>:PARallel:CLOCK:ISCLO CKed Sets or returns whether the parallel bus is

clocked

BUS:B<x>:PARallel:CLOCK:SOUrce Sets or returns the parallel bus<x> clock

source

BUS:B<x>:PARallel:WIDth Sets or returns the number of bits used for

the width of the parallel bus <x>

MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-13

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 440 441

Commentaires sur ces manuels

Pas de commentaire

Connect-Tek USB-2 Spécifications Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau Connect-Tek USB-2