Connect-Tek USB-2 Spécifications Page 121

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 441
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 120
Commands Listed in Alphabetical Order
NOTE. This comm
and will return
PASSED
for probes that do not support degauss
operations.
Group
Vertical
Syntax
CH<x>:PRObe:DEGAUss:STATE?
Returns
NEEDED indicates the probe should be degaussed before taking measurements.
RECOMMENDED indicates the measurement accuracy might be improved by
degaussing the probe.
PASSED indicates the probe is degaussed.
FAILED indicates the degauss operation failed.
RUNNING indicates the probe degauss operation is currently in progress.
CH<x>:PRObe:FORCEDRange
Sets or returns the range of a TekVPI probe attached to the channel specied by
<x>, where x is the channel number.
NOTE. This command will return
PASSED
for probes that do not support degauss
operations.
Group
Vertical
Syntax
CH<x>:PRObe:FORCEDRange <NR3>
CH<x>:PRObe:FORCEDRange?
Arguments
<NR3> specie s the range, which is probe specic.
Returns
This command returns 0.0 for probes that do no support forced range.
C
H<x>:PRObe:GAIN
Sets or returns the gain factor for the probe attached to the channel specied by
<x>, where x is the channel number. The "gain" of a probe is the output divided
by the input transfer ratio. For example, a common 10x probe has a gain of 0.1.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-105
Vue de la page 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 440 441

Commentaires sur ces manuels

Pas de commentaire