Connect-Tek USB-2 Spécifications Page 226

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 441
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 225
Commands Listed in Alphabetical Order
MEASUrement:
REFLevel:ABSolute:MID2
Sets or returns the mid reference level for the "to" waveform when
taking a delay mea surement, and is the 50% reference level when
MEASUrement
:REFLevel:METHod is set to Absolute. This command affects the
results of delay measurements.
NOTE. this command affects the associated reference level parameter for all
MEASurements:IMMed and the four periodic measurements.
Group
Measurement
Syntax
MEASUrement:REFLevel:ABSo lute:MID2 <NR3>
MEASUrement:REFLevel:ABSo lute:MID2?
Related Commands
MEASUrement:REFLevel:METHod
Arguments
<NR3> is the mid reference level, in volts. The default is 0.0 V.
Examples
MEASUREMENT:REFLEVEL:ABSO LUTE:MID2 0.5 sets the mid reference level for
the d elay waveform to 0.5 V.
MEASUREMENT:REFLEVEL:ABSO LUTE:MID2? might return
:MEASUREMENT:REFLEVEL:ABS OLUTE:MID2 0.5000E+00 indicating that the
absolute mid2 referenc
e level is set to 0.5 V.
MEASUrement:REFLevel:ABSolute:MID<x>
Sets or returns the mid reference level for channel <x>, where x is the
measurement channel.
Group
Measurement
Syntax
MEASUrement:REFLevel:ABSo lute:MID<x> <NR3>
MEASUrement:REFLevel:ABSo lute:MID<x>?
Arguments
<NR3> is the mid reference level in volts.
2-210 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Vue de la page 225
1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 440 441

Commentaires sur ces manuels

Pas de commentaire