Connect-Tek USB-2 Spécifications Page 248

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 441
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 247
Commands Listed in Alphabetical Order
Group
Vertical
Syntax
REF<x>:TIMe?
Examples
REF2:TIME? might return “16:54:05”.
REF<x>:VERTical:POSition
Sets or returns the vertical position of the reference waveform specied by <x>,
where x is the reference channel number.
Increasing the position value of a waveform causes the waveform to move up,
and decreasing the position value causes the waveform to move down. Position
adjusts only the display position of a waveform. The position value determines the
vertical graticule coordinate at wh
ich signal values are displayed. For example, if
the position for Reference 3 is set to 2.0, the signal represented by that reference
will be displayed at 2.0 divisions above the center of the screen.
Group
Vertical
Syntax
REF<x>:VERTical:POSition <NR3>
REF<x>:VERTical:POSition?
Related Commands
CH<x>:POSition, MATH[1]:VERTical:POSition
Arguments
<NR3> is the desired position, in divisions from the center horizontal graticule.
The range is from –5.0 to 5.0 divisions.
Examples
REF2:VERTICAL:POSITION 1.3E+00 positions the Reference 2 input signal
1.3 divisions above the center horizontal graticule.
REF1:VERTICAL:POSITION? might r eturn :REF1:VERTICAL:POSI TION
-1.3000E+00
indicating that the current position of Reference 1 is 1.3 divisions
below the center horizontal graticule.
REF<x>:VERTical:SCAle
Sets or returns the vertical scale for the reference waveform specied by <x>,
where x is the reference channel number.
2-232 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Vue de la page 247
1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 440 441

Commentaires sur ces manuels

Pas de commentaire