Connect-Tek USB-4 Manuel d'utilisateur Page 1

KEYPORT MILLENNIA USB Series Models: USB-2, USB-4 User Manual Connect-Tek, Inc. 39-20 24th Street Long Island City N.Y. 11101 Ph

7----------------- Operation Front Panel 1. On-line LED & Selected LED When the LED turns green, the connected computer is powered-on. When a

8For USB-2 To activate the Auto Scan, press and hold the pushbutton down for 2 seconds till you hear a long beep followed by a short beep. To exit f

9------ Rack Mount Kit for USB-4 (optional) The figure below shows how to attach optional mounting brackets and cable support to the USB-4 for stand

10----------------- Appendices Specifications Specification USB-4 USB-2 No. of computers supported 4 2 Front panel push button 4 1 Hot plug-and

11----------------- Troubleshooting Ensure that all cables are well seated. Label the cable for each computer to avoid confusion when connected to

12much power instantaneously. Improper device initialization.  When the USB KVM switch works under self-power, i.e., no power supply added, it sup

13----------------- Other PS/2 KVM Switches Other high-performance Connect-Tek KVM switches for PS/2 interface. One console-to-multiple-computer N

WARRANTY Connect-tek, Inc., hereby warrants that this product shall be free from defects in materials and workmanship for a period of one (1) year, fr

Table of Contents Introduction Overview... 1 Features ...

1----------------- Introduction Overview The USB-2 and USB-4, are fully compatible with USB specifications, and combine USB KVM (keyboard / Video

2Features  Manage 2 or 4 PCs, G3/G4 Macs, or iMacs from one USB keyboard, mouse and monitor with USB-2 and USB-4 respectively.  2 or 4 computers

3----------------- System Requirements Console side One VGA, SVGA or Multisync monitor One USB keyboard One USB mouse Computer side Each USB-

4----------------- Installation PC BIOS Notice The following BIOS setup changes are necessary for PC users and not necessary for Mac users: 1. I

5Console Connection Before installation, make sure all devices and computers to be connected to the USB KVM switch have been turned off. Plug a mon

6Computer Connections Use a HDB15 male-to-female cable to connect from a computer's VGA port to the USB KVM Switch's VGA port of PC side,